FEPM (Aflas) O‑Ring
Product successfully added to the Quote List
When standard sealing materials start to struggle, FEPM O-rings are often the next step up. Also known as Aflas O-rings, they’re built for tough industrial conditions involving steam, sour gas, aggressive chemicals and high-pH media.
Industrial Experts supplies FEPM O-rings Australia-wide in standard and custom sizes, with support to help you choose the right option for your application.
What Is an FEPM O-Ring?
An FEPM O-ring is a high-performance rubber seal made from tetrafluoroethylene-propylene (TFE/P). FEPM is the generic name for the material, while Aflas is AGC’s trademarked brand of FEPM. So when you see FEPM or Aflas O-rings, they’re referring to the same material family.
What matters more is choosing the right grade and hardness for the job.
- 70 Shore A suits many general sealing applications.
- 90 Shore A is firmer and better suited to higher-pressure applications, where a softer O-ring may be more likely to extrude.
The right FEPM grade depends on three main things: what the seal will come into contact with, the operating temperature, and the pressure.
Our team at Industrial Experts can help recommend the most suitable FEPM grade and hardness for your application.
FEPM O-Ring Properties & Performance
FEPM is built for harsh chemical and steam environments where Viton may not hold up. It is resistant to many compounds, including:
- Sour gas
- Acids
- Strong bases
- Amines
- Petroleum oils
- Brake or steering fluids
It is highly durable while maintaining a low compression set during repeated heating and cooling cycles. The main trade-off is reduced flexibility in colder conditions, so it’s worth checking the low-temperature limits before choosing this gasket.
| Property | FEPM Value | Why It Matters |
| Temperature | −10°C to +230°C (+14°F to +446°F); +200°C continuous | Seals steam and hot lines that soften Viton |
| Chemical resistance | Acids, bases, amines, brake and steering fluids, oils | Covers media that swell FKM |
| Sour gas (H₂S) | Resistant | Suits oilfield sour service |
| Compression set | Low | Holds sealing force through thermal cycling |
| Hardness | 70 to 90 Shore A | Balances seal and extrusion resistance |
| Cost tier | Mid to high | Sits between Viton and FFKM |
Still unsure about the right fit for your application? Industrial Experts can help you compare the operating conditions and required hardness before you order.
FEPM vs Viton (FKM) vs FFKM O-Rings
Viton, FEPM and FFKM all handle demanding sealing conditions, but they work best in different environments.
Viton (FKM) is the go-to for fuels, oils and many general industrial chemicals. FEPM (Aflas) is a better fit when steam, sour gas, amines or high-pH media are involved. FFKM sits at the top end for the most aggressive chemical environments and critical applications.
So, the choice really comes down to what the seal will be exposed to. FEPM is often the sweet spot when Viton isn’t sufficiently resistant, but FFKM offers superior performance at a much higher price.
| Material | Max Temperature (°C / °F) | Strongest Against | Relative Cost | Choose When |
| Viton (FKM) | +200°C (+392°F) | Fuels, oils, many chemicals | Mid | Hot oil and fuel jobs |
| FEPM (Aflas) | +230°C (+446°F) | Steam, H₂S, amines, high pH | Mid to high | Sour gas, steam, high-pH media |
| FFKM | +327°C (+621°F) | Near-universal | Highest | Extreme chemicals, critical service |
If none of these quite match the job, Industrial Experts also stock:
- Nitrile O-Rings for standard oil and fuel applications
- Silicone O-Rings for food-grade and wide-temperature sealing
- EPDM Sponge Cord for water and weather applications
Reach out to our team today for more product information.
FEPM O-Ring Sizes & Custom Manufacturing
Industrial Experts supplies FEPM O-rings in standard and custom sizes, including:
- AS568 imperial sizes
- ISO 3601 metric sizes
- Custom sizes made to order
We stock on-hand O-rings in standard cross-sections: 1.78 mm (0.070″), 2.62 mm (0.103″), and 3.53 mm (0.139″). For non-standard grooves or oversized applications, custom FEPM O-rings can also be:
- Moulded to drawings for repeat production
- Vulcanised in large diameters where standard moulded sizes aren’t practical
Everything is supplied from our Melbourne workshop, with technical support to help confirm the right size and specification before production. Local supply also helps reduce the delays that often come with sourcing specialist seals overseas.
Need something beyond an O-ring? We also offer made-to-measure gasket cutting for custom sealing applications.
Trusted Supplier for FEPM O-Rings in Australia
Our FEPM O-rings are the go-to choice for demanding industrial sealing where standard FKM may not be the best fit. We see them used most often across five key sectors:
- Oil and gas: For equipment dealing with hydrogen sulphide and hot crude.
- Chemical processing: For pumps and valves carrying strong bases, amines, and acids.
- Automotive brake and steering: For brake and power-steering fluids that swell nitrile.
- Steam and power generation: For steam lines and turbine equipment.
- Amine and high-pH media: For amine gas-treating and caustic process lines.
See our application-specific O-rings for more guidance on choosing the right ring for the job.
Why Buy FEPM O-Rings from Industrial Experts
- Local FEPM specialist: Australian FEPM (Aflas) O-ring supplier and manufacturer
- Technical support: Our experienced team helps you select the right grade for the job
- Country-wide dispatch: To keep your production moving without a hitch.
- Trade pricing: Available on larger orders.
- One supplier: Get everything in one place for a more streamlined experience.
We also stock a broader range of industrial gaskets, so you can source seals and gaskets in one order.
Get in touch with our team for grade advice or a quote on your next FEPM order.
FEPM O-Rings in Australia FAQs
Are FEPM and Aflas O-rings the same?
Yes. FEPM is the technical name for the material, tetrafluoroethylene-propylene rubber, and Aflas is AGC’s registered brand name for it. Other manufacturers may sell their own versions of the compound under different names, but they all fall within the same FEPM family, with performance varying by grade rather than brand.
What is the temperature range of FEPM O-rings?
FEPM runs continuously to around +200°C (+392°F), with short spikes tolerated up to +230°C (+446°F). On the low end, it sits near −10°C (+14°F), which is higher than most rubbers, so it’s worth checking that limit against your operating environment if the application involves any cold conditions.
Can FEPM O-rings handle steam and sour gas?
Yes, this is where FEPM outperforms Viton. It resists hydrogen sulphide (H₂S), amines, and strong bases that would break down a standard fluoroelastomer, and it holds up well against steam and high-pH media too. That combination is why it’s become the standard choice for sour oilfield and steam service applications across Australia.
No datasheets available.