Source O-rings online from Industrial Experts, supplying nitrile, Viton, silicone, EPDM, FFKM, and FEPM (Aflas) options for Australian industries in both AS568 imperial and ISO 3601 metric sizes.

We’re based in Melbourne and dispatch O-rings Australia-wide, with trade pricing available on bulk orders. If you’re after O-rings for sale in a specific size or compound, our team can help you pick the right one or create a custom batch.

Contact Us

Read More

What Is an O-Ring?

An O-ring is a ring of rubber, shaped like a small doughnut, that sits in a groove between two parts to stop gas or liquid from escaping. It works by compressing when the parts come together, filling any tiny gaps so nothing can pass through. They do this job in two ways:

  • A static seal holds still between fixed parts, such as a flange face.
  • A dynamic seal rides against a moving part, such as a piston rod in a hydraulic cylinder.

Need the right seal? Shop quality O-rings in Australia from Industrial Experts today.

O-Rings For Sale at Industrial Experts

Different O-ring materials are made to handle different conditions. The table below covers our six types of O-rings for sale, along with their temperature range and where they’re best used.

Material

Temperature Range (°C / °F)

Strongest Resistance

Weak Against

Typical Hardness

Common Use

Nitrile (NBR)

−30°C to +120°C (−22°F to +248°F)

Petroleum oils, fuels, hydraulic fluid

Ozone, sunlight, strong acids

70 Shore A

Hydraulics, fuel systems

Viton (FKM)

−20°C to +200°C (−4°F to +392°F)

Heat, fuels, many chemicals

Steam, hot water, ketones

75 Shore A

Hot engines, chemical plant

Silicone (VMQ)

−60°C to +230°C (−76°F to +446°F)

Extreme heat and cold, food contact

Abrasion, oils, fuels

70 Shore A

Food, medical, static seals

EPDM

−50°C to +150°C (−58°F to +302°F)

Water, steam, weather, brake fluid

Petroleum oils and fuels

70 Shore A

Water, HVAC, outdoor

FFKM

−15°C to +327°C (+5°F to +621°F)

Almost all chemicals at high heat

High cost

75 Shore A

Semiconductor, pharma, oil & gas

FEPM (Aflas)

−10°C to +230°C (+14°F to +446°F)

Steam, sour gas, amines, high pH

Low-temperature flex

75 Shore A

Oilfield, chemical processing

Nitrile (NBR) O-Rings

Nitrile is the workhorse choice for oil, fuel, and hydraulic fluid. It holds a service range of −30°C to +120°C (−22°F to +248°F) at a standard 70 Shore A hardness and resists mineral oils, diesel, and grease well. Where it struggles is ozone and direct sunlight, so it’s not the best pick for long outdoor exposure. 

Browse our Nitrile O-Rings range for stock sizes.

Viton (FKM) O-Rings

Viton takes over where nitrile can’t keep up, handling heat, fuel, and aggressive chemicals once temperatures climb past 120°C. It’s the usual upgrade for hot engines and chemical plant equipment where the media gets harsher.

Explore our range of Viton O-Rings.

Silicone O-Rings

Silicone handles wide temperature swings and is the go-to for food-grade sealing. It stays flexible in cold conditions that stiffen other rubbers and heat that degrades them. It works best as a static seal, making it suitable for medical devices and other food-contact settings. 

Check our Silicone O-Rings range for available sizes.

EPDM Sponge Cord

EPDM seals water, steam, and weather, but swells on contact with petroleum oils and fuels. It is great for plumbing, HVAC and weather-resistant sealing applications. Potable water grades are also available for residential and public water plumbing.

For larger or custom sealing applications, explore our EPDM Sponge Cord options. 

FFKM O-Rings

FFKM offers exceptional chemical resistance in demanding conditions, making it the best choice for critical applications in semiconductor manufacturing, pharmaceuticals, and oil and gas industries. It’s also the highest-cost O-ring material we stock.

Discover our high-performance FFKM O-Rings range.

FEPM (Aflas) O-Rings

FEPM, better known as Aflas, resists steam, sour gas, and amine chemicals better than Viton, making it the seal of choice for oilfield and high-pH jobs. It withstands hydrogen sulphide (H₂S) and high-pH fluids, though it stiffens at low temperatures. 

Check out our FEPM (Aflas) O-Rings range for your job.

A Quick Guide to Sizing Standards

O-ring size comes down to three measurements: 

  • Inside diameter (ID): The distance across the inside of the ring. 
  • Outside diameter (OD): The overall diameter from one outer edge to the other.
  • Cross-section (CS): The thickness of the ring itself. 

Three sizing systems cover most of the O-rings you’ll come across: AS568 (Imperial), ISO 3601 (Metric), JIS B 2401. Here’s how they compare at a glance:

Standard

Measurement Basis

Common Cross-Sections

Best For

AS568 (Imperial)

Imperial dash numbers

1.78, 2.62, 3.53, 5.33, 6.99 mm

US and legacy equipment

ISO 3601 (Metric)

Metric ID and CS

1.0, 1.5, 2.0, 2.5, 3.0 mm

European and modern machinery

JIS B 2401

Japanese P, G, and S series

1.9, 3.1, 5.7 mm

Japanese equipment

In Australia, you’ll find all three standards in use. The correct size usually depends on the equipment manufacturer and the dimensions of the ring groove, so always match the original standard where possible.

Not sure which size or standard your job needs? Learn how to choose the right O-Ring, or contact our team to find the right match. 

O-Ring Applications Across Australian Industries

If it holds fluid or gas, there’s probably an O-ring in it. From mining equipment to food processing machinery, six sectors account for the demand for O-rings in Australia:

  • Automotive and transport: Nitrile and Viton O-rings seal fuel engines & air conditioning.
  • Hydraulics and pneumatics: Nitrile rings seal cylinders, valves, and fittings under pressure.
  • Plumbing and water: EPDM-seal taps, pumps, and water lines, including potable supply lines.
  • Food and beverage: Food-grade silicone seal processing lines, fillers, and fittings.
  • Mining and heavy industry: Nitrile and Viton-sealed hydraulic rams and drive systems withstand extreme heat.
  • Water treatment: EPDM seal dosing pumps and pipework exposed to chlorine.

Our O-Rings by application guide goes deeper into which materials are best suited to different applications.

Need more information? Call our team at 0400 762 823 to get expert support. 

Custom O-Rings & Cords

Our custom O-rings cover sizes, cross-sections, or compounds outside the standard ranges. At Industrial Experts, we offer three main options:

  • Moulded: Custom tooling for repeat production runs.
  • Vulcanised: Cord joined into large-diameter rings for low-volume jobs.
  • Cut cord: Cut to length for oversized or square grooves.

This route suits very large diameters, non-standard sizes, and unusual compounds. Lead times vary. Cut cord is the fastest option, while moulded parts take longer to produce but are better suited to ongoing production runs. 

We also offer custom gasket cutting and industrial rubber moulding to specification, so you can source matching rings and flange gaskets from one supplier.

Why Source O-Rings from Industrial Experts

  • Australian manufacturer: We manufacture, stock, and customise O-rings in-house.
  • Melbourne-based: We deliver Australia-wide, keeping lead times short for customers.
  • Wide range: Standard AS568 and metric sizes on hand.
  • Technical support: Our expert team advises on the right compound for your application.
  • Trade pricing: Available on higher-volume orders.
  • Family-owned: Australian-owned and operated business.
  • One supplier: Full range of industrial gaskets stocked for complete sealing solutions.

Get in touch with our team today for trade pricing. 

O-Rings in Australia FAQs

Are nitrile and Viton O-rings interchangeable?

Not always. Both are common general-purpose compounds, but they handle different conditions. Nitrile suits oil, fuel, and hydraulic fluid up to around 120°C, while Viton copes with higher heat and more aggressive chemicals. Swapping one for the other without checking the operating conditions may cause early failure.

What size O-rings do you stock?

We stock standard AS568 imperial sizes and metric sizes to ISO 3601, across common cross-sections from 1.78 mm to 6.99 mm (AS568) and 1.0 mm to 3.0 mm (metric). If you need something outside these ranges, we can cut or mould a custom O-ring to match.

What causes the seal to fail or leak?

Most failures come down to the wrong material for the job, incorrect sizing, or general wear over time. Extreme operating conditions and poor installation can all cause degradation, stopping the seal from doing its job. Picking a compound rated for your application and sizing it correctly from the start is the best way to avoid this.

Are you looking at custom solutions for your industrial sealing needs? At Industrial Experts, we have the right answer for you.

Contact Now
Quick Call